Plant equipment
Turn key
![](http://www.moldrupsystem.com/wp-content/uploads/2015/07/9-Picardie-anlæg-fra-siden-e1437992704396.jpg)
IWT supplies the plant in one or more finish-mounted units. After being put on a concrete floor and connected to electricity and water, the plant is operational.
Often the plant is ready for operation a few hours after delivery.
Our delivery includes commissioning, taking into operation and instruction of plant operators.
Capacities
![](http://www.moldrupsystem.com/wp-content/uploads/2015/07/10-12.27.11-kopi-e1437992810641.jpg)
The standard plants have a diameter of 2.000 mm for packs of wood up to 1,20 m wide and 1,50 m high (including 8-10 mm stickers).
Usable lengths 5.000 mm, 6.000 mm or 12.000 mm.
Annual capacities from 1,500 m3 and higher.
Other dimensions available.
Investment
![](http://www.moldrupsystem.com/wp-content/uploads/2015/06/8-SSP-with-container-building.jpg)
The investment in your Hydro-Thermal treatment plant from IWT starts at 250,000 Euro for an annual capacity of 1,500+ m3.
The cost includes a thermal oil boiler, delivery and taking into operation.
Less expensive plants are also available – with vacuum but then without high vapour pressure and its advantages.